In response to the current wood debarker operations and maintenance, we must periodically check the wood debarker all around the bolt, and wood peeling before use clean the machine inside and outside structure, placed in a dry and ventilated environment, in order to ensure that machinery is not humid. At the same time as wood debarker for long-cut strip very easily cause the cutter blade loss ground, reducing the efficiency of wood debarker. Specific issues for cutter blade damage, before the job we should cutter blade for wood debarker for testing, on the wear of cutter blades for sharpening, prompt return of Cutter blade razor. And wood peeling machine before using bearing rotating parts add oil to maintain well-functioning wood debarker.
1, axle bearing high oil temperature, should immediately stop checking reasons be eliminated.
2, pay attention to replacement parts, regularly check the parts for wear and for each key link parts add oil, if necessary, replacement parts, so commonly used in everyday production reserves of small parts, especially blade and gear, when faced with an emergency situation does not delay production.
3, correct feeding, reduce burdens, when feed speed is moderate, if the device is jammed by wood, to immediately shut down, reducing the damage of the machine, when the fault in power production.
4, the mobile chassis surface, dust and other matter having activity when items are not broken so that the machine should not be at the base.
5, long-term functioning of the devices pose the greatest test of the device, no matter how good the machine working long hours can cause impairment of life, the saying goes, is the rate of depreciation, so reasonably schedule production time.
Label：debarker
